Hydro-logic 1/4 FLOW MASTER Digital Flow Meter Manual de usuario descargar pdf

Step 1: Install 2 AAA Batteries

as shown in drawing

Step 2: Install Flowmaster on the

product (purified water) line.

Cut tubing and push firmly

into fittings.

1. Press the “Filter” button to light up the LCD screen. The dot should be under filter position

#1. If it is not, push the “Filter” button until the dot is under #1.

2. Program the metering units: Using a small sharp pin or something similar, lightly press the

setting button located above the top right corner of the screen. Press the “Filter” button to toggle

through the four possible metering unit modes. For filter capacities with four digits, set the units

to “gallons”. For filter capacities with five digits, set the units to “gallons x 10”.

3. Program the filter capacity: After programing the units, press the “Setting” button to toggle

through each of the four digits, and set each of the four digits according to the table above.

Press the “Filter” button to increase the number from 0 to 9 while the LCD screen is flashing.

4. The Flowmaster will memorize the setting automatically after pausing for 5 seconds.

5. Note the four bars on the left hand side of the screen which show that the setting was stored

sucessfully.

6. There is an option to program the “Monthly Lifetime Setting”. However, this application does

not require this option. PLEASE SKIP THIS SETTING.

7. Resetting the unit: After the filter capacity has reached it’s set life, a buzzer will sound to

alert the user to replace the filter. After replacing the filter, press the “Reset” button. The

accumulated number of gallons will be reset to zero and a new filter life begins.

Programing the Flowmaster:

Stealth-RO100 & Stealth-RO200 1,250

Stealth-RO100 & Stealth-RO200 w/KDF 2,000

Triton-RO/DI200 & Triton-RO/DI200 2,000

Triton-RO/DI200 & Triton-RO/DI200 w/KDF 3,250

Filter Capacity Gallons

2. There is a possibility of

programming 6 dierent

lter capacities. Use only

lter position #1 for this

application.

**** PLEASE NOTE ****

1. You only have 5 seconds

between each step, or the

screen will go blank.

- See Reverse -

PURIFICATION SYSTEMS

For Use With: Stealth-RO100 & RO200, Triton-RO/DI100 & RO/DI200 and most other RO systems

1/4” FLOW MASTER Digital Flow Meter Manual

1 2

Indice de contenidos

Pagina 1 - Programing the Flowmaster:

Step 1: Install 2 AAA Batteries as shown in drawingStep 2: Install Flowmaster on the product (purified water) line.

Pagina 2 - PURIFICATION SYSTEMS

FLOW MASTER Programing Example WARNING: 1. This product is pressure sensitive. Changes in water pressure

Comentarios a estos manuales

Sin comentarios

Hydro-logic 1/4 FLOW MASTER Digital Flow Meter Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios para el agua Hydro-logic 1/4 FLOW MASTER Digital Flow Meter. Hydro-Logic 1/4 FLOW MASTER Digital Flow Meter User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios para el agua Hydro-logic 1/4 FLOW MASTER Digital Flow Meter